Module: OUGD301
Title: Design Practice 3
I came back from the summer with an idea of what direction I wanted to go in, since doing my ‘work placement’. I realised from it that it was definitely not the direction I wanted to go in, producing illustration that served no purpose or real meaning. The whole concept of supporting myself and basing an income on ‘wacky’ and ‘fun’ illustration depressed me so much, I knew I had to make some huge strides this year if I intend to succeed in the ‘industry’. Afterwards, I continued to struggle to find any other placements that might help restore my faith that there was indeed a need for graphic designers/creative talent, and it seemed to me from the responses I got that the entire industry was bursting at the seams with graphic designers and no longer needing any fresh faced students to take on any roles in agencies etc. What worried me even more is the current economical situation, the problem is just going to get worse as small studios close their doors forever and new agencies no longer appear as they are unable to attain loans to start up their businesses.
But perhaps it was just me, perhaps my standard of work was just not strong enough. So this year I decided I wanted to hit the ground running, and focus on the areas of graphic design where I felt there would always be a need for. I felt if I produced an instructional graphic / technical drawing-based project, I could continue to work with illustration (where my strength lies, particularly in vector illustration) whilst also showing my ability to produce useful graphic design. I wrote the ‘Taking It Apart’ brief for this reason, which is arguably my strongest piece of work from this module. I wanted to work with type and image, putting into practice the skills I picked up during the second year visual language module. I feel like to a greater extent, I produced the work I set out to do, however if the time constraints had permitted I would have liked to have explored another device. I also had to abandon plans to producing a user handbook and packaging as part of the project. The reason for abandoning the manual idea was my admittedly not so great abilities on InDesign. The fact that I chose to do visual language over type meant that I had less than necessary skills required to produce the manual on this piece of software. I felt in order to produce the manual it would essentially be like adding another brief to the module, something that my time would not allow. Since producing my boards for this module and the software session on InDesign, I actually picked up a great deal of skills, and in fact wonder why I shied away in the first place because the software is so simple. I didn’t run with my packaging idea, not for the same reasons however, simply because I felt it was unnecessary and my time would be served better making sure the manufacturers guide was up to scratch. Overall I am happy with the outcomes for this brief, and I feel I really found where my strongest work lies. I definitely want to produce more instructional/technical illustration as part of my FMP. The weakness for this brief for me was the fact I didn’t work with more devices, but I am not sure if even if I had managed my time better I could have fit another in, as there is so much scope for what you can produce for even one device.
When I wrote the brief ‘A Week In The News’ I had considered it as a week-long brief, however as time went on it became clear that it was not going to such a quick one. Out of the three, this brief is clearly the weakest, and this is due in part to my bad time management with this brief. I chose a bad week to work on it, due to other sessions and commitments that were happening at the same time, meaning I had to shelve it several times. The reason for writing it was in order to work with layout and infographics, to see if I could improve my skills in both these areas, which I did, but perhaps not as much as I would have liked. Towards the end of the module, when I began to work with different stock and formats (see the ‘energy diagram’ as an example) I really began to enjoy this brief, but I think it was too late to continue working in this way and re-produce all my work in this way. Despite this, I am glad I wrote this brief, as it has informed me about the need to write my briefs better, and direct it towards specific outcomes.
The competition brief, ‘Europe By Designers’ was one I had a lot of fun with. I began this brief as another infographics project, working on the basis of ‘Europe and me’. However after producing a few diagrams around this subject, I began to consider the idea of a product range, based on Europe as a brand. So instead of abandoning this brief, I twisted the meaning for my own purposes, as I wished to work on brand and product design again. I am quite happy with this brief, as it became a very focused ‘design for print’ brief. The only weaknesses lie with perhaps needing to do more contextual research and looking at how I could market the brand, as I worked almost solely on the products themselves, and it would have been interesting to see how I could have advertised the brand.
Overall I have come a long way during this course, and the work for this module stands out as some of my strongest I feel I have ever produced. For the FMP, I am going to focus specifically in the areas I found strongest from this module, and direct the work in this way. Over the Christmas break, I don’t want to drop the pace, and will be looking for opportunities to continue producing relevant work (whilst also working on my dissertation).
Thursday, 18 December 2008
Saturday, 13 December 2008
Europe Brief - final product photography
These are some of the final shots of the products for the Europe range. Because of some colour issues in the printing of the t-shirt and mug (mainly t-shirt) I've done some touching up and colour correction in post production. You can see more about the button badges and water bottles in earlier posts.

Full range

Mug
T-shirt front - close
T-shirt front - further away
T-shirt back
Full range
These photos will ultimately be used for my final board for this brief, thus tying it all together. The board will be sent as a jpeg as my entry for the competition. So I better make it good.
Manufacturers' Guide. Part 2.
Below is the final version of the guide. I made changes and additions to the type, and some subtle changes to the images and layout. I printed on A2 satin stock, because of the way satin/semi gloss holds the black ink better than other stocks. There's not much more to say about this, I feel that this, aswell as the enthusiasts guide, makes for two boards that almost wrap this brief up. I think that bring it to a proper end what is left is to mock up some contextual photography.
Full print
Manufacturers' Guide. Part 1.
Towards the end of last week I revisited my first brief, Taking It Apart, for the purpose of bringing it to an end. I started with the manual, which I had planned for a long time, and even began initial mockups and designs for. However, I just found it purposeless - I didn't write the manual, and my illustrations were not suitable. So I decided to produce a manufacturers' guide- which is basically what this whole brief was leading to. I began to produce an A2 sheet (same format as the enthusiasts guide) with all the information necessary to put this thing together. Below are four of the digital concepts I produced.

Although I began with the same colours as my enthusiasts guide (top left), they seemed a bit too vibrant for a guide like this. I vastly preferred the white on black version, so this is the one I went for.
For consistency, I used a modified version of the layout for the enthusiasts guide.


More information on this in part 2.
Although I began with the same colours as my enthusiasts guide (top left), they seemed a bit too vibrant for a guide like this. I vastly preferred the white on black version, so this is the one I went for.
For consistency, I used a modified version of the layout for the enthusiasts guide.
More information on this in part 2.
Sunday, 7 December 2008
I like your t-shirt.
I'm no fan of t-shirts for the sake of t-shirts if you know what I mean. Wearing a t-shirt that has some cliche student thing ie. plain lazy, i love NY, but I stumbled on this link from b3ta.com's latest newsletter.

Glennz Tee Store
These t-shirts are just so great, lovely concepts, I wouldn't mind getting one. In terms of actual purpose or message, I don't think they have one. This is just a rare example of where it doesn't need one due to the strength of image.
Glennz Tee Store
These t-shirts are just so great, lovely concepts, I wouldn't mind getting one. In terms of actual purpose or message, I don't think they have one. This is just a rare example of where it doesn't need one due to the strength of image.
Thursday, 4 December 2008
George Lois
http://www.georgelois.com/
Wednesday, 3 December 2008
Miika Saksi
Miika Saksi is a creative director, illustrator and director from Finland.
His work consists mainly of fantastic illustration and/or photomontage for use in advertising and magazine articles.
To see his work reminds me of what I wanted to be when I started the Graphic Design course, and although I have developed in a different direction I still have a lot of respect for this style of work, a great deal of it is truly beautiful and inspiring.
http://www.miikasaksi.com/
Hobs
Tuesday, 2 December 2008
Week In The News - type
The feedback towards my original idea for the type on the back of each supplement was quite negative, mainly due to the way that words like 'Britain' and 'decline' were broken up into seperate lines. I produced several new versions, keeping the same idea but trying to make the type feel... tight.




This is the selected layout, albeit in the wrong format. I printed it like this for the purpose of annotation, so I can decide whats needs changing for the final-final version. As you scroll down you can see some of the process behind selecting this one.
final-ish one again, as siginified by the red star. this time in the right format, only smaller (roughly half of A3, rather than half of A2).
This layout I didn't go with, but thought it was worth mentioning. I considered the idea of displaying all of the information from the other side (pie charts etc) into a the type itself. I managed to do this to some extent, before abandoning the idea due to the pointlessness of it, and the way it hurts the layout.
These are all of the layouts that went on the wall, you will notice that they all match up with those in the photos, except there is an extra one on the wall. On this sheet I have noted as much information as possible about the typeface, size, kerning, tracking, leading, etc underneath each layout.
All of the layouts up on the wall, the selected one is the second from last on the bottom row, with the red star drawn on. The reason I chose it is due to the fact that none of the type is broken up, the type is strong but not too strong, and it was possible to make the last two lines' fulls stops match up (I don't know why but this clinched it for me). The reason I used the extended version of Helvetica Neue was because of the fact it reminded me of the pie charts on the other side. You can sort of see this in the way I attempted to change a couple of the characters into pie charts.
Wednesday, 26 November 2008
Evaluation – thus far
It’s about 3 weeks to deadline, give or take. And I haven’t finished a single brief yet. I am using this evaluation to scrutinise each brief, so I can figure out what I need to do to get things finished.
Taking It Apart
The first brief I started, hit the ground running. I am quite pleased with the visual side of this brief, but the problem is contextualising- I haven’t done much of that yet. I began an owners handbook, which I spent several days working on before abandoning it for a couple of weeks. Big mistake. I could potentially have had it finished by now but I chose to work on other stuff for a while. Anyway the point is this could be a key context that could help this brief to be the strongest of the three. I produced an A2 poster summarising some of the key work for this brief, which you can also find on this blog. This is something very suitable for a videogame magazine spot, so I think I will find a way to incorporate this, as it could look very nice. The struggle would be to get it to work at A4 format. Other contexts (let’s hope I find the time for this) is packaging for the pad. The idea for this being that each side of the box displays a different view on the ‘x-ray’ perspective of the controller. Let’s see what comes of it. And finally a manufacturers guide/assembly guide. I think the illustrations are already suitable for this, so we’ll see if I can produce this successfully.
The ‘Europe Brief’
The second brief started. I began this brief as an info graphics thing, trying to search my brain (and my various internet accounts) for statistics and information that connect me and Europe. The results were unsatisfactory save for one idea (the circles thing, you can see it on this blog). I’m not continuing this idea anymore, but may still submit some of the work from this as the visuals are OK. What happened with this brief was I came up with something potentially stronger. As the brief asked ‘what does Eurrope mean to you?’ I decided that I could come from the angle of Europe as a consumer product. This meant producing a range of products with the Europe brand, starting with things I knew I could produce (the button badges, water bottle labels). I think one or two more products would complete this range in terms of actually physically producing them. I am still considering some possibilities, including; a jigsaw, t-shirts, posters and bags, though I am thinking the jigsaw may work better as a computer generated concept rather than a physical product, as the resources are not the best (laser cutter on card wouldn’t be great). Ultimately because this is an online submission whatever the final format for displaying these products is (a board? A catalogue? A goodie bag?) It will have to be well photographed. That’s OK I recently bought an SLR.
A Week In The News
Now this brief has changed a little from what I started with. After producing a few days of work for the brief, I noticed that there was a trend – all of the articles I was creating info graphics for where to do with this country being in decline. Therefore the subsequent stories chosen are to continue this theme. Another point was that originally I planned to do 7 days- this proved difficult due to commitments to the other briefs, the availability of resources etc. So I reduced the workload to 5 days – a working week, Monday-Friday. This is actually slightly better suited as the stories are concerned mostly with UK business statistics. The format is chosen and for now seems to work- there is a lot that can be done within it, I just feel that I haven’t explored enough in terms of paper stock. I could do with printing the infos onto newsprint etc. The exploration of stock could help bring the brief to a close, as it is one that I intended not to spend too long on in the beginning.
So that’s where I am right now. Three unfinished briefs, 3 weeks to go. The possibility of a fourth brief is still there, but it is one I will not be spending too long on if I was to tackle it. I would have to do something akin to the short Don’t Panic briefs (although I would rather not get involved with Don’t Panic again, personally.) Let’s hope I get everything I wrote here done by the deadline.
Tuesday, 25 November 2008
Lamosca
Lamosca are awesome. I'm sure most people on graphic design have seen their work, if you haven't, well... go on their website and have a look.
Lamosca website
Monday, 24 November 2008
A Week In The News
This brief (which has changed slightly) is to take an article from the news each day for a week, and produce an infographic out of the information provided. Mostly this involved further research in order to gather more facts and statistics to represent. The task for each day was accomplished with a combination of Excel (for accurate diagrams) and Illustrator. Some backup work from this brief is shown below, to give an understanding of the process involved:
The infographics themselves took the form of a fold-out insert for publications (it fits tabloid and broadsheet currently, although an effort may be made to specify it to single format.)
These are just two of five. Three are finished, one is in development and the other is not started. The ease of using the same grids/guides I have created means it shouldn't take too long to wrap up this brief. Famous last words..
I forgot to mention, on the rear of each foldout is the explanatory text of these infographics - they are tied together by the them of 'Britain in Decline'. I made a quick board to display this for a recent crit, with some horrendous type- I apologize! This will be tidied up.
Friday, 21 November 2008
Taking It Apart - current status
This is the poster and boards shown in the last crit. Click on either of the posters to view bigger, as it is difficult to make out any of the measurement details in the thumbnails. The boards give more detail about where I intend to take this work.
board 2 - final concepts
Thursday, 20 November 2008
The 'Europe Brief' part 2
I chose to continue with this brief, but I took it in a different direction. I liked the idea that Europe could be a brand/a line of products that could be marketed and sold ("Europe is a consumer product") The first product is a series of button badges. I started with the map of Europe I had already drawn, and basically removed each country for each badge. I liked the simplicity of the shape of each country, although admittedly some of them were a little too simple and were later redrawn.
As you can see I intended for the badges to be round, although this later changed to square (no big deal.) I then made a couple of mockups to show how I wanted the product to look overall.
I ran with the idea as I did like the mockups, although they saw several changes. I made the shape of some of the countries more recognisable, changed the typeface altogether (from Helvetica to Akzidenz-Grotesk, for those interested) And made a slight colour adjustment. Also as I mentioned they become square. This was suitable as each of the countries was drawn with 45 degree angles, so it made sense that the badge was one at 45 degree angles.
The images shown above are the best ones I took when the sets were freshly made. As you can see, the sets are the four richest countries of Europe and the four poorest. The other two planned sets are the four highest taxed and four lowest. For the sake of it here are a few more photos.
It wasn't long after producing these that we had a crit on our work up to this point. For clarity on my concept for this brief, I produced a couple of quick boards to show people what I was intending to do. They are worth reading if you are reading this and still don't understand what I am doing.
As you can see here, one of the planned products was a series of water bottles. Essentially this just meant designing the label as bottled water takes a general shape usually (as I found out in my research)
The brief continues. Watch this space...
Subscribe to:
Posts (Atom)
